Description
The flexible drainage connector is designed for joining, repairing or adapting plain-ended drainage pipes with outside diameters between 140mm and 165mm. This VIPSeal VDC165 drain coupling is commonly used with 6 inch PVC drainage pipework and other compatible underground drainage materials within the correct outside diameter range.
It is a practical fitting for drainage repairs, alterations and maintenance work where pipework needs to be joined quickly and securely. The flexible EPDM rubber body helps accommodate small differences in pipe diameter, while the stainless steel tension bands tighten the connector around the pipe ends.
This connector is suitable for low and non-pressure drainage applications. It is useful for groundworkers, builders, drainage installers and maintenance teams working on underground foul water or surface water systems.
Flexible Drainage Connector for 6 Inch PVC Pipe
This flexible drainage connector suits pipe outside diameters from 140mm to 165mm. It is often used with 6 inch PVC drainage pipework, but it can also be used with other compatible pipe materials where the outside diameter falls within the correct range.
Before ordering or fitting, always measure the outside diameter of the pipe. Pipe sizes can vary between materials, manufacturers and older systems. The pipe ends should also be clean, sound and properly supported so the coupling can seal correctly.
- Flexible drainage connector for 6 inch PVC pipework
- VIPSeal VDC165 product reference
- Official size range: 140mm to 165mm outside diameter
- 120mm coupling width
- EPDM rubber body for drainage use
- 304 stainless steel tension bands
- Useful for repairs, alterations and joining cut pipe lengths
- Suitable for low and non-pressure drainage systems
- Designed for underground drainage and sewer repair work
Flexible Drainage Connector for Drain Repairs
The flexible drainage connector is a useful product for repairing damaged pipework or joining short sections of drainage pipe. It can be used when a damaged section has been removed and a new section needs to be connected back into the existing run.
Because this coupling does not include a shear band, it is best used where resistance to heavy earth loads is not required. For applications that need shear or deflection resistance, a standard shear-banded coupling may be more suitable.
Always check the site specification before use. If the pipework is in unstable ground, heavily loaded areas or adoption work, confirm the correct coupling type before installation.
Flexible Drainage Connector Installation Use
The flexible drainage connector should be fitted to clean, plain-ended pipework. First, measure the outside diameter of each pipe. Then confirm that both pipe ends fall within the 140mm to 165mm range for this VDC165 coupling.
Slide the connector over one pipe end, align the second pipe, then position the coupling centrally over the joint. Tighten the stainless steel tension bands evenly to the manufacturer’s recommended torque. This helps the EPDM sleeve compress around the pipe and create a reliable seal.
The pipe ends should be properly bedded and supported before backfilling. Good support helps reduce movement at the joint and helps protect the drainage system after installation.
Flexible Connector for Underground Drainage
This flexible drainage connector can be used to join pipes in different materials, provided the pipe outside diameters are within the correct size range. This makes it useful on repair jobs where existing drainage pipework needs to connect into replacement PVC pipework.
For best results, avoid using the connector on cracked, uneven or badly damaged pipe ends without preparing the pipe first. The sealing area should be clean and smooth enough for the rubber sleeve to grip correctly.
This product can create a secure repair joint when installed correctly, but it is not a substitute for proper pipe bedding, correct fall, drainage testing or suitable backfill.
Compatible Underground Drainage Products
TWS stocks a wider range of underground drainage products for trade and site use. This includes 160mm drainage pipe, couplers, bends, branches, access fittings, adaptors, non-return valves, flexible connectors and drainage testing accessories.
View all 160mm underground drainage products at TWS.
Shop flexible drainage connectors at TWS.
For official manufacturer information, see the VIPSeal VDC drain coupling range.
