Description
The 110mm saddle clamp 90° tee lateral connector is designed for connecting a 110mm PVC lateral pipe into a larger smooth wall main drainage pipe. It suits 160mm to 400mm main pipes and gives installers a practical way to add a branch connection into an existing drainage run.
This VIPSeal VTS100 saddle clamp creates a 90° tee connection without replacing a full section of the main pipe. As a result, it can help reduce excavation, cutting and installation time on suitable underground drainage jobs.
The fitting is designed for smooth wall PVC, concrete and vitrified clay host pipes. It uses a flexible saddle body, EPDM sealing gasket and stainless steel securing bands to help create a secure air and water tight connection between the main pipe and the 110mm PVC lateral.
110mm Saddle Clamp for 90° Tee Connections
The 110mm saddle clamp is used when a 110mm PVC lateral pipe needs to enter a larger drainage main at 90 degrees. This makes it useful for drainage alterations, new branch connections, repair work and site upgrades.
Unlike a full branch fitting, this saddle clamp fits around the outside of the existing main pipe. Therefore, it can be a useful option when the main pipe is already installed and a new 110mm connection is needed.
- 90° tee lateral saddle connection
- For 110mm PVC lateral pipe
- Fits 160mm to 400mm smooth wall main pipes
- Suitable for smooth PVC, concrete and vitrified clay host pipes
- EPDM gasket helps create an air and water tight seal
- 304 stainless steel shroud and tension bands
- Useful for foul water and surface water drainage systems
- Designed for trade, groundwork and civil drainage work
110mm Saddle Clamp for Underground Drainage
This 110mm saddle clamp is suitable for underground drainage jobs where a 110mm branch pipe needs to connect into a larger main run. It can be used on compatible smooth wall pipes within the correct outside diameter range.
Before installation, check the host pipe material, outside diameter and condition. The saddle needs a clean pipe surface so the gasket can sit correctly. Also, make sure there is enough working space around the pipe for the stainless steel bands to pass underneath and tighten evenly.
Once the correct opening has been cut into the main pipe, the saddle and gasket are positioned over the prepared hole. The stainless steel shroud and tension bands then secure the fitting around the pipe. Finally, the 110mm PVC lateral pipe connects into the saddle outlet.
Saddle Clamp Installation Use
The 110mm saddle clamp can help simplify lateral connection work on suitable drainage systems. It is especially useful when installing a complete junction would mean removing a larger section of pipe or carrying out more excavation.
For best results, follow the manufacturer’s installation guidance. The hole must be cut accurately, the saddle must sit flat against the host pipe, and the bands should be tightened evenly to the recommended torque. This helps maintain a secure seal before testing, bedding and backfilling.
This fitting is designed for smooth wall drainage pipes. It should not be used as a twinwall or ribbed pipe saddle unless the manufacturer confirms suitability for the specific application. Always check the system type before ordering or fitting.
110mm Saddle Clamp for 160mm to 400mm Mains
This 110mm saddle clamp suits main pipe outside diameters from 160mm to 400mm. That makes it a versatile option for connecting 110mm PVC laterals into larger underground drainage mains on domestic, commercial and civil drainage projects.
It can be used alongside 110mm underground drainage pipe and suitable 160mm underground drainage products where the pipe sizes and site layout are compatible. Always follow the correct site specification for trench preparation, pipe bedding, falls, jointing, testing and backfill.
Compatible Underground Drainage Products
TWS stocks a wider range of underground drainage products for trade and site use. This includes 110mm and 160mm pipe, couplers, bends, branches, access fittings, adaptors, flexible connectors and related drainage accessories.
This 90° tee saddle clamp is a useful add-on item when planning drainage alterations or connecting a 110mm lateral into an existing 160mm to 400mm smooth wall main. Always check pipe compatibility before installation.
View all 160mm underground drainage products at TWS.
Shop underground drainage at TWS.
For official manufacturer information, see the VIPSeal VTS/VYS lateral connection range.
