Description
Kayflow Square Downpipe 65mm 5.5m Anthracite Grey
Kayflow Square Downpipe KFPS55AG is a 5.5m length of 65mm anthracite grey square rainwater pipe. It carries water from the gutter outlet down to ground level, a drain connection or a rainwater shoe.
Delivery & Collection
Due to the 5.5m length, this product is available for Local North East Delivery or Store Collection only.
Trade Overview
This anthracite grey 65mm square downpipe is designed for Kayflow rainwater systems. It works with matching square downpipe fittings, including clips, sockets, bends, branches and shoes.
The square profile gives a clean, modern appearance and suits anthracite grey roofline installations. It is a popular match for square line guttering, ogee guttering, anthracite fascia, soffit and exterior trim work.
Because the pipe is made from PVC-U, installers can handle it on site and cut it to length where required. As a result, it works well for longer vertical drops, new installations, repairs and replacement downpipe runs.
Kayflow Square Downpipe Features
- 65mm x 65mm square rainwater downpipe
- Supplied in a 5.5m length
- Anthracite grey finish
- PVC-U construction for external roofline use
- Modern square profile
- Suitable for domestic roofline and rainwater systems
- Can be cut to length on site
- Compatible with Kayflow 65mm square downpipe fittings
- Use with matching clips, sockets, bends, branches and shoes
- Suitable for Square and Ogee gutter systems
Common Uses
- Carrying rainwater from square gutter outlets to ground level
- Longer vertical rainwater pipe drops
- Anthracite grey guttering and downpipe installations
- Domestic roofline repairs and replacements
- Modern square rainwater pipe runs
- Replacing damaged or faded downpipe lengths
- New gutter and downpipe systems
- Trade building plastics work
Kayflow Square Downpipe Compatible Fittings
Fit this pipe with matching 65mm square downpipe accessories. For example, use square pipe clips to secure the pipe to the wall, sockets to join pipe lengths, offset bends to clear fascia overhangs and a shoe to direct water at the bottom of the run.
It can also be used with compatible Kayflow square line and ogee gutter outlets where a 65mm square downpipe connection is required.
Installation Notes
First, check the route from the gutter outlet down to the drainage point. Then measure the pipe length needed and cut the pipe square if trimming is required.
Next, secure the pipe with suitable wall clips. Space the clips evenly so the pipe stays straight and supported. Finally, check all joints and confirm that rainwater flows freely into the correct drain or outlet point.
Do not force fittings together if the pipe is not aligned correctly. Instead, adjust the clips, bends or sockets so the run sits straight and the joints fit cleanly.
Browse more products in our Kayflow 65mm Square Downpipes & Fittings and Kayflow Guttering & Downpipes categories.
For manufacturer information, see the Kayflow Square Downpipe information.
