Description
McAlpine TSG1T6SS 150mm Stainless Steel Tiled Floor Gully
McAlpine TSG1T6SS is a trapped floor gully for tiled and stone floor installations. It features a 150mm square polished stainless steel tile and removable grid, making it suitable for wet rooms, shower areas and tiled floor drainage where a neat stainless steel finish is required.
McAlpine TSG1T6SS Trade Overview
The McAlpine TSG1T6SS is designed for wet room and tiled floor drainage installations. It has a 75mm water seal to help prevent drain odours from coming back through the floor gully, making it suitable for domestic and commercial shower drainage work.
This gully has a horizontal outlet and is supplied with a 2″ x 1½” socket reducer. This gives installers flexibility when connecting into suitable waste pipework. The 150mm square stainless steel tile and removable grid provide a clean visible finish while allowing access for cleaning and maintenance.
The gully body is made from ABS and is designed for use with tiled or stone floors. It is a practical choice for plumbers, bathroom fitters, wet room installers and maintenance teams working on shower rooms, accessible bathrooms and tiled floor drainage projects.
Key Features
- McAlpine TSG1T6SS trapped tiled floor gully
- 150mm square polished stainless steel tile and removable grid
- Suitable for tiled and stone floor installations
- 75mm water seal to help prevent drain odours
- Horizontal outlet for wet room floor drainage
- 2″ solvent weld horizontal outlet
- Supplied with 2″ x 1½” socket reducer
- Removable grid for cleaning and maintenance access
- ABS gully body for durable waste drainage use
- Flow rate of 48 litres per minute under a 15mm head of water
Common Uses
- Wet room floor drainage
- Tiled shower floor installations
- Stone floor shower areas
- Accessible bathroom and level access shower projects
- Bathroom refurbishment work
- Domestic and commercial shower room installations
- Replacement of existing tiled floor gullies
- Trade plumbing and wet room fitting work
Why Choose a Tiled Floor Gully?
A tiled floor gully is designed for shower areas where the floor finish runs into the drainage point. The McAlpine TSG1T6SS gives a tidy stainless steel finish on the visible surface, while the trapped gully body provides the water seal needed below the floor.
The removable stainless steel grid makes cleaning easier and gives access to the gully for maintenance. This is useful in wet rooms, shower rooms and accessible bathrooms where the floor drain needs to remain serviceable after installation.
Installation Notes
Before fitting, check that the floor build-up, waterproofing system, fall and waste pipe route are suitable for a tiled floor gully. The floor should be formed to drain correctly towards the gully, with the waterproofing and tile finish installed in line with the wet room system being used.
Connect the outlet to suitable waste pipework, using the supplied reducer where required. After installation, run water through the gully and check the floor drain, outlet connection and surrounding seal for leaks before completing the job.
The McAlpine TSG1T6SS is a tiled or stone floor gully. For standard shower tray installations, use a suitable shower tray trap instead.
Browse more products in our 40mm Waste Traps 1½” range, or view the full Waste Traps, Valves & Connectors category.
For manufacturer information, see the McAlpine tiled and stone floor gully information.
