Description
McAlpine X10 32mm 1¼” Straight Through Pedestal Trap
McAlpine X10 is a 32mm / 1¼” straight through pedestal trap for basin waste installations. It is designed for use behind basin pedestals where neat, in-line pipework is required and space can be limited.
McAlpine X10 Trade Overview
The McAlpine X10 straight through trap is a practical choice for plumbers, bathroom fitters and maintenance teams working on pedestal basin installations. The inlet and outlet connections are directly in line, helping the waste pipework sit neatly behind the basin pedestal.
This trap has a 75mm water seal to help prevent drain odours from coming back through the basin waste. It also includes a cleaning eye, making future maintenance easier if the trap needs to be accessed or cleared.
The X10 uses a Multifit compression outlet, which is suitable for common waste pipe materials including plastic, copper and lead pipe. This makes it useful for new pedestal basin installations, replacement work and general bathroom plumbing repairs.
Key Features
- McAlpine X10 straight through pedestal trap
- 32mm / 1¼” size for standard basin waste pipework
- Inlet and outlet connections are directly in line
- Designed for neat plumbing behind basin pedestals
- 75mm water seal to help prevent drain odours
- Includes cleaning eye for easier maintenance
- White polypropylene construction
- Multifit compression outlet for flexible pipe connection
- Suitable for plastic, copper and lead waste pipe
- Conforms to BS EN 274-1:2002
Common Uses
- Pedestal basin waste installations
- Bathroom basin pipework
- Cloakroom basin pipework
- Replacement of old 32mm pedestal traps
- Bathroom refurbishment work
- Rental property bathroom maintenance
- Domestic plumbing repairs
- Trade plumbing installations
Why Choose a Straight Through Pedestal Trap?
A straight through pedestal trap is useful when the waste pipe needs to run neatly behind a basin pedestal. Standard bottle traps or P traps may not always sit correctly in this position, especially where the pedestal hides the pipework.
The McAlpine X10 helps keep the installation tidy while still giving a reliable 75mm water seal. The cleaning eye also gives installers and maintenance teams easier access if the trap needs attention later.
Installation Notes
Before fitting, check that the basin waste and waste pipe size are suitable for a 32mm / 1¼” trap. Cut the waste pipe cleanly and make sure it is fully seated inside the Multifit compression outlet. Line the trap up behind the pedestal, then tighten all compression nuts securely by hand.
After installation, run water through the basin and check all joints for leaks. Make sure the cleaning eye remains accessible where possible for future maintenance.
Browse more products in our 32mm Waste Traps 1¼” range, or view the full Waste Traps, Valves & Connectors category.
For manufacturer information, see the McAlpine product information.
