Description
The Y branch is used to join or branch 50mm solvent weld waste pipework at a 135 degree angle. It is a practical fitting for larger waste pipe runs where one pipe needs to connect neatly into another.
This 50mm solvent weld 135 degree Y branch is suitable for compatible solvent weld waste systems and is available in Black, Olive Grey and White to match common pipework colours. When installed with the correct solvent cement and pipe preparation, it creates a permanent solvent weld joint.
50mm Solvent Weld Y Branch
The Y branch is designed for creating an angled branch connection in 50mm solvent weld waste pipework. The 135 degree layout helps form a smoother connection than a tight square junction, making it useful for waste layouts where flow direction matters.
- 50mm solvent weld 135 degree Y branch
- Used to join or branch 50mm waste pipe runs
- 135 degree angled branch connection
- Suitable for compatible 50mm solvent weld waste pipe systems
- Available in Black, Olive Grey and White
- Creates a permanent joint when fitted with solvent cement
- Useful for larger sink, bath, shower and utility waste pipe installations
- Trade waste fitting for solvent weld waste systems
Using a 50mm Y Branch
Before fitting, check that the pipe and fitting are the correct size, clean and dry. Cut the pipe square, remove burrs, chamfer the pipe end where required and follow the correct solvent weld process for the pipe system being installed.
Once solvent cement is applied and the joint is made, leave the connection to cure according to the solvent cement instructions before testing or putting the waste system into use.
Y for 135 Degree Waste Pipe Runs
This Y branch is designed for 50mm waste pipe systems where an angled branch connection is required. It can be used where pipework needs to merge into a main waste run or where a branch needs to be taken off at a smoother angle.
Before ordering, check the pipe size, colour and branch angle required for the installation. If a square branch connection is needed, a 50mm solvent weld 90 degree swept branch may be more suitable.
Y Branch and Solvent Weld Waste Fittings at TWS
For general UK drainage and waste pipe guidance, see Approved Document H: Drainage and waste disposal.
This 50mm Y branch is part of our solvent weld waste pipe and fittings range. You can also browse related waste pipe, bends, couplers, clips, reducers, access fittings and other branch fittings below.
View solvent weld waste pipe and fittings at TWS.
View 50mm solvent weld waste fittings at TWS.
