Description
The 50mm swept branch is used to create a branch connection in solvent weld waste pipe systems. It is a practical fitting for larger sink, bath, shower, utility and general plumbing installations where one 50mm waste pipe run needs to join into another.
This 50mm solvent weld swept branch is suitable for compatible 50mm solvent weld waste systems and is available in Black, Olive Grey and White to match common pipework colours. The swept branch shape helps create a smoother connection than a square junction and is useful where flow direction needs to be considered.
50mm Swept Branch for Solvent Weld Waste
The 50mm swept branch is designed for larger waste pipe systems where a branch connection is required. It is commonly used where a secondary waste run needs to connect into a main pipe run while keeping the installation neat and secure.
- 50mm solvent weld swept branch
- Used to create a branch connection in 50mm waste pipework
- Swept shape helps create a smoother pipe connection
- Suitable for compatible 50mm solvent weld waste pipe systems
- Available in Black, Olive Grey and White
- Creates a permanent joint when fitted with solvent cement
- Useful for larger sink, bath, shower and utility waste pipe installations
- Trade waste fitting for solvent weld plumbing systems
Using a 50mm Swept Branch
Before fitting, check that the pipe and fitting are the correct size, clean and dry. Cut the pipe square, remove burrs, chamfer the pipe end where required and follow the correct solvent weld process for the system being installed.
Once solvent cement is applied and the joint is made, leave the connection to cure according to the solvent cement instructions before testing or putting the waste system into use.
50mm Branch for Larger Waste Pipe Runs
This 50mm swept branch is suitable for larger waste pipe layouts where one run needs to connect into another. It can be used on kitchen, bathroom, shower, utility and general internal waste pipework.
Before ordering, check the pipe size, colour and branch style required for the installation. If a different branch angle is needed, a 50mm 135 degree Y branch may be more suitable.
50mm Swept Branch and Solvent Weld Fittings at TWS
For general UK drainage and waste pipe guidance, see Approved Document H: Drainage and waste disposal.
This 50mm branch fitting is part of our solvent weld waste pipe and fittings range. You can also browse related waste pipe, bends, couplers, clips, reducers, access plugs and other branch fittings below.
View 50mm solvent weld waste fittings at TWS.
View solvent weld waste pipe and fittings at TWS.
