Description
The solvent weld conversion bend is used to create a 45 degree change of direction in 32mm solvent weld waste pipe installations. It is a practical waste fitting for redirecting 32mm waste pipework in basin, cloakroom and general plumbing systems.
This 32mm solvent weld conversion bend is suitable for compatible solvent weld waste systems and is available in Black, White and Olive Grey to match common waste pipe colours. When installed with the correct solvent cement and pipe preparation, it creates a permanent solvent weld joint.
32mm Solvent Weld Conversion Bend
The solvent weld conversion bend is designed for 32mm waste pipe systems where a 45 degree change of direction is required. It is commonly used where a gentler angle is preferred instead of a tight 90 degree bend.
- 32mm solvent weld 45 degree conversion bend
- Used to change waste pipe direction by 45 degrees
- Suitable for compatible 32mm solvent weld waste pipe
- Available in Black, White and Olive Grey
- Creates a permanent joint when fitted with solvent cement
- Useful for basin, cloakroom and general waste pipe installations
- Compact fitting for plumbing and refurbishment work
- Trade waste fitting for solvent weld waste systems
Using a Solvent Weld Conversion Bend
Before fitting, check that the pipe and fitting are the correct size, clean and dry. Cut the pipe square, remove burrs, chamfer the pipe end where required and follow the correct solvent weld process for the pipe system being installed.
Once solvent cement is applied and the joint is made, leave the connection to cure according to the solvent cement instructions before testing or putting the waste system into use.
Solvent Conversion Bend for 45 Degree Waste Pipe Runs
This solvent weld conversion bend is designed for changing direction in 32mm solvent weld waste pipework. The 45 degree angle can be useful where pipework needs to be routed around obstacles or where a smoother directional change is preferred.
Before ordering, check the pipe size, colour and bend angle required for the installation. If a sharper turn is needed, a 32mm solvent weld 90 degree conversion bend may be more suitable.
Solvent Weld Conversion Bend and Waste Fittings at TWS
For general UK drainage and waste pipe guidance, see Approved Document H: Drainage and waste disposal.
This 32mm conversion bend is part of our solvent weld waste pipe and fittings range. You can also browse related waste pipe, couplers, clips, branches, reducers, access fittings and other bends below.
View solvent weld waste pipe and fittings at TWS.
View 32mm solvent weld waste fittings at TWS.
