Description
The knuckle bend is used to create a tight 90 degree change of direction in 32mm solvent weld waste pipe systems. It is a practical fitting for basin, cloakroom and general plumbing installations where waste pipework needs to turn neatly in a compact space.
This 32mm solvent weld 90 degree knuckle bend is suitable for compatible solvent weld waste systems and is available in Black, Olive Grey and White to match common waste pipe colours. When installed with the correct solvent cement and pipe preparation, it creates a permanent solvent weld joint.
32mm Solvent Weld Knuckle Bend
The knuckle bend is designed for 32mm waste pipe systems where a sharp directional change is required. Its compact shape makes it useful in tighter pipe layouts where a swept bend may take up too much room.
- 32mm solvent weld 90 degree knuckle bend
- Used to create a tight 90 degree change of direction
- Suitable for compatible 32mm solvent weld waste pipe systems
- Available in Black, Olive Grey and White
- Creates a permanent joint when fitted with solvent cement
- Useful for basin, cloakroom and general waste pipe installations
- Compact fitting for tight spaces and neat pipe layouts
- Trade waste fitting for solvent weld waste systems
Using a 32mm Knuckle Bend
Before fitting, check that the pipe and fitting are the correct size, clean and dry. Cut the pipe square, remove burrs, chamfer the pipe end where required and follow the correct solvent weld process for the pipe system being installed.
Once solvent cement is applied and the joint is made, leave the connection to cure according to the solvent cement instructions before testing or putting the waste system into use.
Knuckle for Tight Waste Pipe Runs
This knuckle bend is suitable for 32mm solvent weld waste pipework where a compact 90 degree bend is needed. It can help route pipework around units, walls, boxing and other restricted plumbing areas.
Before ordering, check the pipe size, colour and bend style required for the installation. If a smoother bend is preferred, a 32mm solvent weld 92.5 degree swept bend may be more suitable.
Knuckle Bend and Solvent Weld Fittings at TWS
For general UK drainage and waste pipe guidance, see Approved Document H: Drainage and waste disposal.
This 32mm knuckle bend is part of our solvent weld waste pipe and fittings range. You can also browse related waste pipe, swept bends, couplers, clips, branches, reducers and access fittings below.
View solvent weld waste pipe and fittings at TWS.
View 32mm solvent weld waste fittings at TWS.
