Description
The waste branch is used to connect a branch line into 32mm solvent weld waste pipework. It is a practical fitting for basin, cloakroom and general plumbing installations where one 32mm waste pipe run needs to join into another.
This 32mm solvent weld 90 degree waste branch is suitable for compatible solvent weld waste systems and is available in Black, Olive Grey and White to match common waste pipe colours. When installed with the correct solvent cement and pipe preparation, it creates a permanent solvent weld joint.
32mm Solvent Weld Waste Branch
The waste branch is designed for creating a branch connection in 32mm solvent weld waste pipework. It is commonly used where a smaller basin or cloakroom waste run needs to connect into a main 32mm waste pipe line.
- 32mm solvent weld 90 degree waste branch
- Used to join or branch 32mm waste pipe runs
- Commonly listed by some suppliers as a 92 degree waste branch
- Suitable for compatible 32mm solvent weld waste pipe systems
- Available in Black, Olive Grey and White
- Creates a permanent joint when fitted with solvent cement
- Useful for basin, cloakroom and general waste pipe installations
- Trade waste fitting for solvent weld waste systems
Using a 32mm Waste Branch
Before fitting, check that the pipe and fitting are the correct size, clean and dry. Cut the pipe square, remove burrs, chamfer the pipe end where required and follow the correct solvent weld process for the pipe system being installed.
Once solvent cement is applied and the joint is made, leave the connection to cure according to the solvent cement instructions before testing or putting the waste system into use.
Branch for 32mm Pipe Installations
This waste branch is designed for 32mm solvent weld waste pipe systems where a branch connection is required. It can be used where pipework needs to merge into a main waste run or where a branch needs to be taken off for another waste outlet.
Before ordering, check the pipe size, colour and branch layout required for the installation. If a smoother angled connection is needed, a 32mm solvent weld 135 degree Y branch may be more suitable.
Waste Branch and Solvent Weld Fittings at TWS
For general UK drainage and waste pipe guidance, see Approved Document H: Drainage and waste disposal.
This 32mm waste branch is part of our solvent weld waste pipe and fittings range. You can also browse related waste pipe, bends, couplers, clips, reducers, access fittings and other branch fittings below.
View solvent weld waste pipe and fittings at TWS.
View 32mm solvent weld waste fittings at TWS.
