Description
VIPSeal Flexible Coupling 50mm 2″ VE050-60
VIPSeal Flexible Coupling VE050-60 is a 50mm / 2″ flexible pipe coupling for waste, soil, vent and low-pressure drainage pipework. It is designed for joining, adapting or repairing plain-ended pipes where a flexible connection is needed.
VIPSeal Flexible Coupling Trade Overview
The VIPSeal VE050-60 flexible coupling is a practical repair and connection fitting for plumbers, drainage installers and maintenance teams working with 50mm waste and low-pressure pipe systems.
The flexible body helps form a seal around plain-ended pipe, while the stainless steel clamp bands tighten around the pipework to create a secure connection. This makes it useful for repairs, alterations and awkward pipe connections where a rigid fitting may not be suitable.
The VE050-60 size reference is suitable for pipework around the 50mm to 60mm outside diameter range, depending on pipe material and installation. It is commonly used for waste pipe repairs, low-pressure pipe connections and adapting compatible pipe sizes.
Key Features
- VIPSeal VE050-60 flexible coupling
- Nominal 50mm / 2″ pipe coupling
- Approximate size range 50mm to 60mm
- Suitable for waste, soil, vent and low-pressure drainage pipework
- Useful for joining and repairing plain-ended pipes
- Flexible body helps compensate for slight pipe misalignment
- Stainless steel clamp bands for secure tightening
- Black finish
- Suitable for repair, maintenance and refurbishment work
- Useful where rigid fittings are difficult to install
Common Uses
- 50mm waste pipe connections
- 2″ waste pipe repairs
- Low-pressure drainage pipe repairs
- Joining plain-ended pipe sections
- Repairing damaged pipe sections
- Connecting short or cut pipe lengths
- Adapting compatible pipe outside diameters
- Trade plumbing and drainage jobs
Why Choose a VIPSeal Flexible Coupling?
A flexible coupling is useful when pipework needs a repair connection or when pipe ends do not line up perfectly. It can help save time on site by allowing a secure flexible joint without needing a full rigid pipework rebuild.
The VIPSeal Flexible Coupling VE050-60 is especially useful for 50mm / 2″ waste and low-pressure pipework where a flexible repair coupling is required.
Installation Notes
Before fitting, check the outside diameter of both pipes to make sure they fall within the correct coupling range. Clean the pipe ends and remove loose dirt, burrs or damaged edges before installation.
Slide the coupling over the pipe ends, centre it over the joint, then tighten the stainless steel clamp bands evenly. Do not overtighten beyond the manufacturer’s guidance, and make sure the pipe run is supported correctly.
After installation, test the pipework and check the joint for leaks before covering or boxing in.
This product is a flexible coupling, not a waste trap or appliance connector.
Browse more products in our Flexible Waste Connectors & Adaptors category, or view the full Waste and Traps range.
For manufacturer information, see the VIPSeal flexible couplings and adaptors information.
