Description
VIPSeal Flexible Coupler 75mm 3″ VE075-86
VIPSeal Flexible Coupler VE075-86 is a 75mm / 3″ flexible rubber coupling for joining or repairing waste and drainage pipework. It is designed for low-pressure and non-pressurised pipe systems where a flexible connection is needed.
VIPSeal Flexible Coupler Trade Overview
The VIPSeal VE075-86 flexible coupler is a practical repair and connection fitting for plumbers, drainage installers and maintenance teams working with 75mm waste, drainage and pipework systems.
The flexible rubber body helps form a seal around plain-ended pipe, while the stainless steel clamp bands tighten around the pipework to create a secure connection. This makes it useful for repairs, alterations and awkward pipe connections where a rigid fitting may not be suitable.
This coupler is commonly used where pipework needs to be joined, repaired or adapted across compatible outside diameters. The VE075-86 size reference is suitable for pipework around the 75mm to 86mm outside diameter range, depending on the pipe material and installation.
Key Features
- VIPSeal VE075-86 flexible coupler
- Nominal 75mm / 3″ flexible pipe coupling
- Approximate size range 75mm to 86mm
- Suitable for low-pressure and non-pressurised pipe systems
- Useful for joining and repairing plain-ended pipes
- Flexible rubber body helps compensate for slight pipe misalignment
- Stainless steel clamp bands for secure tightening
- Black finish
- Suitable for plumbing, waste and drainage repair work
- Useful where a rigid coupling is difficult to install
Common Uses
- 75mm waste pipe repairs
- Drainage pipe connections
- Joining plain-ended pipe sections
- Repairing damaged pipe sections
- Connecting short or cut pipe lengths
- Low-pressure pipework alterations
- Maintenance and refurbishment work
- Trade plumbing and drainage jobs
Why Choose a VIPSeal Flexible Coupler?
A flexible coupler is useful when pipework needs a repair connection or when pipe ends do not line up perfectly. It can help save time on site by allowing a secure flexible joint without needing a full rigid pipework rebuild.
The VIPSeal Flexible Coupler VE075-86 is especially useful for 75mm / 3″ waste and drainage pipework where a flexible repair coupling is required.
Installation Notes
Before fitting, check the outside diameter of both pipes to make sure they fall within the correct coupling range. Clean the pipe ends and remove loose dirt, burrs or damaged edges before installation.
Slide the coupler over the pipe ends, centre it over the joint, then tighten the stainless steel clamp bands evenly. Do not overtighten beyond the manufacturer’s guidance, and check that the pipe run is supported correctly.
After installation, test the pipework and check the joint for leaks before covering or boxing in.
This product is a flexible coupler, not a waste trap or appliance connector.
Browse more products in our Flexible Waste Connectors & Adaptors category, or view the full Waste and Traps range.
For manufacturer information, see the VIPSeal flexible couplings and adaptors information.
