Description
The 200mm Y branch 45° double socket is an underground drainage fitting used to create a smoother angled branch connection in 200mm drainage pipework. It is suitable for larger foul water and surface water systems where 200mm pipework needs to connect into a main drainage run.
This Funke underground drainage branch is designed for compatible 200mm PVC-U underground drainage pipework. The 45° Y branch layout gives a smoother angled entry into the main run compared with a right-angle tee branch.
The double socket design provides socketed connections where required within the drainage layout. It is a practical fitting for larger domestic drainage systems, commercial groundwork, site drainage alterations and underground pipe repairs.
200mm Y Branch for Underground Drainage
The 200mm Y branch is used where 200mm underground drainage pipework needs an angled branch connection. This can be useful on larger foul water systems, surface water layouts, yard drainage and commercial site drainage where 200mm pipe is specified.
Because the branch is the same size as the main run, this fitting allows 200mm pipework to continue through the system while another 200mm pipe connects at a 45° angle. This helps create a cleaner branch point without needing reducers at the connection.
- 200mm underground drainage Y branch
- 45° angled branch connection
- Double socket branch fitting
- Connects 200mm pipework into a 200mm drainage run
- Suitable for foul water and surface water drainage systems
- PVC-U underground drainage fitting
- Orange-brown / terracotta underground drainage colour
- Useful for larger domestic, commercial and groundwork drainage layouts
- Funke KGEA DN 200/200/45° SDR 41 fitting
200mm Y Branch Double Socket Connection
This 200mm Y branch is designed for use with compatible 200mm underground drainage pipework. The 200mm section forms part of the main drainage run, while the 200mm branch connects into the fitting at a smoother 45° angle.
Before installation, check the pipe sizes, flow direction and final branch position. The branch should point in the correct direction for the drainage layout and should not be forced into poor alignment.
Use suitable pipe lubricant on ring seal joints where required. Make sure pipe ends are clean before jointing. If pipework is cut to length, make a clean square cut and chamfer the edge before fitting. This helps protect the seal and makes the joint easier to assemble.
200mm Y Branch Installation Use
The 200mm Y branch should be installed as part of a properly planned underground drainage system. It is useful where a 200mm branch line needs to enter a 200mm main drainage pipe at a smoother angled connection.
Correct bedding and backfill are important around the branch. The pipework and fitting should be evenly supported so the drainage system remains stable after installation. Poor support can place stress on the sockets and may affect long-term performance.
Because this is a branch fitting, the wider drainage layout should include suitable access for future rodding, inspection or maintenance where required. Always follow the site specification, current UK drainage guidance and manufacturer instructions.
200mm Y for Site Drainage Work
The 200mm Y branch is a practical product for builders, groundworkers, landscapers and drainage installers working with larger 200mm underground drainage systems. It can be used on new installations, drainage alterations, pipework extensions and repair work.
For best results, use compatible pipe and fittings from the same underground drainage system where possible. This helps keep jointing simple and supports a clean, consistent installation.
This product is not an access fitting. If inspection or rodding access is needed at this point in the drainage layout, use a suitable access branch, inspection chamber or rodding point as required.
Compatible 200mm Underground Drainage Products
This 200mm Y branch is part of the wider TWS 200mm underground drainage range, making it easy to match with compatible pipe, bends, couplers, reducers, socket plugs and flexible connectors for site drainage work.
TWS stocks a wider range of 200mm underground drainage products for trade and site use. This includes 200mm drainage pipe, couplers, slip couplers, bends, branches, reducers, end caps, socket plugs, pipe lubricant and flexible connectors.
View all 200mm underground drainage products at TWS.
Shop all underground drainage at TWS.
For external verification, see the Funke BSI/Kitemark EN 1401 certificate data.
