Description
The 200mm unequal Y branch 45° double socket is an underground drainage fitting used to connect 110mm pipework into a larger 200mm drainage run. It is suitable for foul water and surface water systems where a smaller 110mm branch needs to join a 200mm main pipe at a smoother angled connection.
This Magnaplast KG underground drainage branch is designed for compatible PVC-U underground drainage pipework. The 200mm main connection suits larger drainage runs, while the 110mm outlet allows a smaller branch line to feed into the system.
The 45° Y branch layout gives a smoother angled entry into the main run compared with a right-angle tee branch. This makes it useful for site drainage alterations, commercial drainage layouts, larger domestic systems and groundwork projects where different pipe sizes need to connect neatly.
200mm Unequal Y Branch for Underground Drainage
The 200mm unequal Y branch is used where a 110mm underground drainage pipe needs to enter a 200mm main run at an angle. This can be useful for gully connections, surface water runs, foul drainage connections and larger site drainage layouts.
Because this is an unequal branch, it connects two different pipe sizes in one fitting. This helps reduce the need for separate reducers at the branch point and supports a cleaner drainage layout.
- 200mm to 110mm underground drainage Y branch
- 45° angled branch connection
- Double socket branch fitting
- Connects 110mm pipework into a 200mm main drainage run
- Suitable for foul water and surface water drainage systems
- PVC-U underground drainage fitting
- Orange / terracotta underground drainage colour
- Useful for larger domestic, commercial and groundwork drainage layouts
- Magnaplast KGEA 200/110 45° fitting
200mm Unequal Y Branch Double Socket Connection
This 200mm unequal Y branch is designed for use with compatible 200mm and 110mm underground drainage pipework. The 200mm section forms part of the main drainage run, while the 110mm branch connects into the fitting at a 45° angle.
Before installation, check the pipe sizes, flow direction and final branch position. The branch should point in the correct direction for the drainage layout and should not be forced into poor alignment.
Use suitable pipe lubricant on ring seal joints where required. Also, make sure pipe ends are clean before jointing. If pipework is cut to length, make a clean square cut and chamfer the edge before fitting. This helps protect the seal and makes the joint easier to assemble.
200mm Unequal Y Branch Installation Use
The 200mm unequal Y branch should be installed as part of a properly planned underground drainage system. It is useful where 110mm pipework needs to connect into a larger 200mm drainage run with a smoother angled branch.
Correct bedding and backfill are important around the branch. The pipework and fitting should be evenly supported so the drainage system remains stable after installation. Poor support can place stress on the sockets and may affect long-term performance.
Because this is a branch fitting, the wider drainage layout should include suitable access for future rodding, inspection or maintenance where required. Always follow the site specification, current UK drainage guidance and manufacturer instructions.
Unequal Y Branch for Site Drainage Work
This fitting is a practical product for builders, groundworkers, landscapers and drainage installers working with mixed 200mm and 110mm underground drainage systems. It can be used on new installations, drainage alterations, pipework extensions and repair work.
For best results, use compatible pipe and fittings from the same underground drainage system where possible. This helps keep jointing simple and supports a clean, consistent installation.
This product is not an access fitting. If inspection or rodding access is needed at this point in the drainage layout, use a suitable access branch, inspection chamber or rodding point as required.
Compatible 200mm Underground Drainage Products
This 200mm unequal Y branch is part of the wider TWS 200mm underground drainage range, making it easy to match with compatible pipe, bends, couplers, reducers, socket plugs and flexible connectors for site drainage work.
TWS stocks a wider range of 200mm underground drainage products for trade and site use. This includes 200mm drainage pipe, couplers, slip couplers, bends, branches, reducers, end caps, socket plugs, pipe lubricant and flexible connectors.
View all 200mm underground drainage products at TWS.
View 110mm underground drainage products at TWS.
Shop all underground drainage at TWS.
For external manufacturer information, see the Magnaplast KGEA SN8 branch data.
