Description
The 160mm Y branch 45° triple socket is an underground drainage fitting used to create an angled branch connection in 160mm drainage pipework. It is suitable for foul water and surface water drainage systems where a 160mm branch needs to connect into a 160mm main run.
This Funke underground drainage branch has three socketed connections, helping installers create a neat push-fit joint from each direction. The 45° Y branch layout gives a smoother angled entry into the main run compared with a right-angle tee branch.
It is a practical fitting for larger domestic drainage layouts, commercial groundwork projects, site drainage alterations and underground pipe repairs where 160mm drainage pipework is specified.
160mm Y Branch for Underground Drainage
The 160mm Y branch is used where 160mm underground drainage pipework needs an angled branch connection. This can be useful on larger drainage runs, foul water systems, surface water layouts and commercial site drainage where 160mm pipe is required.
Because all three connections are socketed, the fitting helps keep installation simple on site. It can reduce the need for extra couplers around the branch point and supports a cleaner drainage layout when used with compatible 160mm pipework.
- 160mm underground drainage Y branch
- 45° angled branch connection
- Triple socket design for push-fit pipe connections
- Connects 160mm pipework from three directions
- Suitable for foul water and surface water drainage systems
- PVC-U underground drainage fitting
- Orange-brown / terracotta colour to match underground drainage systems
- Useful for larger domestic, commercial and groundwork drainage layouts
- Funke KGEA-TS 160mm 45° triple socket branch fitting
160mm Y Branch Triple Socket Connection
This 160mm Y branch has three socketed openings for compatible 160mm underground drainage pipe. The main run connects through the straight section, while the branch connection allows another 160mm pipe to enter at 45 degrees.
Before installation, check the pipe sizes, flow direction and final branch position. The branch should point in the correct direction for the drainage layout and should not be forced into poor alignment.
Use suitable pipe lubricant on ring seal joints where required. Also, make sure pipe ends are clean before jointing. If pipework is cut to length, make a clean square cut and chamfer the edge before fitting. This helps protect the seal and makes the joint easier to assemble.
160mm Y Branch Installation Use
The 160mm Y branch should be installed as part of a properly planned underground drainage system. It is useful where a 160mm branch line needs to enter a 160mm main drainage pipe at a smoother angled connection.
Correct bedding and backfill are important around the branch. The pipework and fitting should be evenly supported so the drainage system remains stable after installation. Poor support can place stress on the sockets and may affect long-term performance.
Because this is a branch fitting, the wider drainage layout should include suitable access for future rodding, inspection or maintenance where required. Always follow the site specification, current UK drainage guidance and manufacturer instructions.
160mm Y for Site Drainage Work
The 160mm Y branch is a useful fitting for builders, groundworkers, landscapers and drainage installers working with larger 160mm underground drainage systems. It can be used on new drainage runs, pipework extensions, repairs and system alterations.
For best results, use compatible pipe and fittings from the same underground drainage system where possible. This helps keep jointing simple and supports a clean, consistent installation.
This fitting is not an access fitting. If inspection or rodding access is needed at this point in the drainage layout, use a suitable access branch, inspection chamber or rodding point as required.
Compatible 160mm Underground Drainage Products
TWS stocks a wider range of 160mm underground drainage products for trade and site use. This includes 160mm drainage pipe, couplers, slip couplers, bends, access fittings, reducers, socket plugs, non-return valves, flexible connectors and testing accessories.
View all 160mm underground drainage products at TWS.
Shop underground drainage at TWS.
For official manufacturer range information, see the Funke HS® underground drainage pipe system.
