Description
The 160mm tee branch 90° double socket is an underground drainage fitting used to create a right-angle branch connection in 160mm drainage pipework. It is suitable for foul water and surface water drainage systems where a 160mm branch needs to connect into a larger 160mm pipe run.
This Funke underground drainage branch is designed for compatible 160mm PVC-U underground drainage pipework. The 90° branch layout is useful where a pipe run needs to join the main drainage line at a right angle.
The double socket design provides socketed connections where required within the drainage layout. It is a practical fitting for larger domestic drainage systems, commercial groundwork, site drainage alterations and underground pipe repairs.
160mm Tee Branch for Underground Drainage
The 160mm tee branch is used where 160mm underground drainage pipework needs a right-angle branch connection. This can be useful on larger drainage runs, foul water systems, surface water layouts and commercial site drainage where 160mm pipe is specified.
Because the branch is the same size as the main run, this fitting allows 160mm pipework to continue through the system while another 160mm pipe connects at 90 degrees. This helps create a clean branch point without needing reducers at the connection.
- 160mm underground drainage tee branch
- 90° / 87.5° nominal right-angle branch connection
- Double socket branch fitting
- Connects 160mm pipework into a 160mm drainage run
- Suitable for foul water and surface water drainage systems
- PVC-U underground drainage fitting
- Orange-brown / terracotta colour to match underground drainage systems
- Useful for larger domestic, commercial and groundwork drainage layouts
- Funke KGEA double socket branch fitting
Double Socket Branch Connection
This double socket branch is designed for use with compatible 160mm underground drainage pipework. The socketed connections help installers create secure push-fit joints as part of the pipe layout.
Before installation, check the pipe sizes, flow direction and final branch position. The branch should sit correctly within the drainage layout and should not be forced into poor alignment.
Use suitable pipe lubricant on ring seal joints where required. Also, make sure pipe ends are clean before jointing. If pipework is cut to length, make a clean square cut and chamfer the edge before fitting. This helps protect the seal and makes the joint easier to assemble.
160mm Tee Branch Installation Use
The 160mm tee branch should be installed as part of a properly planned underground drainage system. It is useful where a 160mm branch line needs to enter a 160mm main drainage pipe at a right angle.
Correct bedding and backfill are important around the branch. The pipework and fitting should be evenly supported so the drainage system remains stable after installation. Poor support can place stress on the sockets and may affect long-term performance.
Because this is a 90° branch fitting, the drainage layout should include suitable access for future rodding, inspection or maintenance where required. Always follow the site specification, current UK drainage guidance and manufacturer instructions.
160mm Tee Branch for Site Drainage Work
The 160mm tee branch is a useful fitting for builders, groundworkers, landscapers and drainage installers working with larger 160mm underground drainage systems. It can be used on new drainage runs, pipework extensions, repairs and system alterations.
For best results, use compatible pipe and fittings from the same underground drainage system where possible. This helps keep jointing simple and supports a clean, consistent installation.
This fitting is not an access fitting. If inspection or rodding access is needed at this point in the drainage layout, use a suitable access branch, inspection chamber or rodding point as required.
Compatible 160mm Underground Drainage Products
TWS stocks a wider range of 160mm underground drainage products for trade and site use. This includes 160mm drainage pipe, couplers, slip couplers, bends, access fittings, reducers, socket plugs, non-return valves, flexible connectors and testing accessories.
View all 160mm underground drainage products at TWS.
Shop underground drainage at TWS.
For official manufacturer range information, see the Funke HS® underground drainage pipe system.
