Description
Kayflow Square Offset Bend 65mm 92.5° Anthracite Grey
Kayflow Square Offset Bend KFBS1AG is an anthracite grey 65mm square 92.5° downpipe bend for creating offsets and direction changes in Kayflow square rainwater pipe systems.
Trade Overview
This 92.5° offset bend is designed for the Kayflow 65mm square downpipe system. It is used where the downpipe needs to change direction around fascia, soffit, wall details or other building projections.
The square profile gives a clean, modern finish and suits anthracite grey roofline installations. It is a good match for anthracite grey square downpipe, pipe clips, sockets, shoes and compatible square or ogee gutter outlets.
Because the fitting is made from PVC-U, it is lightweight, durable and easy to handle on site. It is suitable for new rainwater installations, repairs and replacement downpipe runs.
Kayflow Square Offset Bend Features
- 65mm square downpipe offset replacement downpipe runs.
Kayflow Square Offset Bend Features
- 65mm square downpipe offset bend
- 92.5° angle
- Anthracite grey finish
- Nearest colour standard RAL 7016 supplier-listed
- PVC-U construction for external roofline use
- Designed for Kayflow 65mm square downpipe systems
- Used to create direction changes around roofline and wall details
- Modern square profile for anthracite grey roofline work
- Suitable for new work, repairs and replacements
- Supplied as one offset bend
Common Uses
- Creating a downpipe offset below a gutter outlet
- Moving square pipework around fascia or soffit overhangs
- Anthracite grey guttering and downpipe installations
- Domestic roofline repairs
- Modern square rainwater pipe systems
- Trade building plastics work
Compatible Fittings
This bend is made for Kayflow 65mm square downpipe. It should be used with matching square pipe lengths, pipe clips, sockets, branches, shoes and compatible gutter outlets.
You can use the 65mm square downpipe system with suitable Kayflow square line and ogee gutter outlets where a square downpipe connection is required.
Kayflow Square Offset Bend Installation Notes
First, check the downpipe route and work out where the offset needs to sit. Then dry fit the bend with the pipe and any additional offset bends before final fixing.
Next, align the downpipe so the run sits straight and supported. Use suitable wall clips above and below the offset to hold the pipe securely in place.
Finally, check that the outlet, bends and lower pipe run line up correctly. Do not force the fittings together, as this can twist the pipework and affect the joint.
Browse more products in our Kayflow 65mm Square Downpipes & Fittings and Kayflow Guttering & Downpipes categories.
For manufacturer information, see the Kayflow Square Downpipe information.
