Description
The 200mm drainage end cap is an underground drainage fitting used to close off the end of compatible 200mm drainage pipework. It is suitable for larger foul water and surface water drainage systems where a pipe run needs to be capped, sealed or temporarily ended during an installation.
This Funke underground drainage end cap is designed for compatible 200mm PVC-U underground drainage systems. It is useful on larger site drainage layouts, commercial drainage runs, groundwork projects and repair work where an open pipe end needs to be closed safely.
An end cap helps protect the pipe run from dirt, debris and unwanted entry when the system is not continuing beyond that point. It should be fitted correctly and kept accessible where future extension, inspection or maintenance may be required.
200mm Drainage End Cap for Underground Pipework
The 200mm drainage end cap is used where a 200mm underground drainage pipe needs to be closed at the end of a run. It can be used on foul water systems, surface water systems, site drainage runs and larger commercial drainage layouts.
This fitting is a simple but important part of the drainage system. It helps close the pipe end neatly and prevents loose material from entering the pipe before, during or after installation.
- 200mm underground drainage end cap
- Designed to close compatible 200mm drainage pipe ends
- Funke KGK DN 200 SDR 41 spigot cap reference
- Suitable for foul water and surface water drainage systems
- PVC-U underground drainage fitting
- Orange-brown / terracotta underground drainage colour
- Useful for larger domestic, commercial and groundwork drainage layouts
- BS EN 1401-1 listed in BSI/Kitemark data
200mm Drainage End Cap Connection
This 200mm drainage end cap is used to close a compatible pipe or fitting connection, depending on the exact supplied version. Funke’s verified KGK DN 200 SDR 41 reference is listed as a spigot cap, so confirm the fitting style before entering the MPN.
Before fitting, check that the pipe end is clean, square and correctly aligned. If pipework has been cut, chamfer the cut edge before installation. This helps protect the seal and makes the joint easier to assemble.
Use suitable pipe lubricant on ring seal joints where required. Do not force the end cap into poor alignment, as this may affect the seal or long-term performance.
200mm Drainage End Cap Installation Use
The 200mm drainage end cap should be installed as part of a properly planned underground drainage system. It is useful where a pipe run ends, where a future connection may be planned, or where a section needs to be sealed during drainage work.
Correct bedding and backfill are important around capped pipework. The pipe and fitting should be evenly supported so the drainage system remains stable after installation.
Always confirm the finished pipe position, fall direction and future access requirements before backfilling. Follow the site specification, current UK drainage guidance and manufacturer instructions.
End Cap for 200mm Site Drainage Work
This fitting is a useful product for builders, groundworkers, landscapers and drainage installers working with larger 200mm underground drainage systems. It can be used on new installations, drainage alterations, repair work and future connection points.
For best results, use compatible 200mm pipe and fittings from the same underground drainage system where possible. This helps keep jointing simple and supports a clean, consistent installation.
This product is not an access fitting. If rodding or inspection access is required nearby, use a suitable access pipe, inspection chamber or rodding point as required by the drainage layout.
Compatible 200mm Underground Drainage Products
This 200mm drainage end cap is part of the wider TWS 200mm underground drainage range, making it easy to match with compatible pipe, bends, couplers, branches and reducers for site drainage work.
TWS stocks a wider range of 200mm underground drainage products for trade and site use. This includes 200mm drainage pipe, couplers, slip couplers, bends, branches, reducers, socket plugs, pipe lubricant and flexible connectors.
View all 200mm underground drainage products at TWS.
Shop all underground drainage at TWS.
For external verification, see the BSI Product Directory listing for Funke DN 200 fittings.
