Description
Kayflow Ogee Angle 90° Internal 120mm Anthracite Grey
Kayflow Ogee Angle OGA1AG is an Anthracite Grey 90° internal corner fitting for Kayflow 120mm ogee guttering. It is used where an ogee gutter run needs to turn around an inside corner while keeping the rainwater system securely connected.
Kayflow Ogee Angle Trade Overview
This Anthracite Grey Kayflow ogee 90° internal angle is designed for 120mm ogee gutter systems. It is commonly used on domestic roofline installations, replacement guttering jobs and rainwater repairs where the gutter needs to follow an internal corner section of fascia.
The Anthracite Grey PVC-U finish matches the wider Kayflow ogee range, including 4m gutter lengths, fascia brackets, union brackets, running outlets, stopends, stopend outlets and matching downpipe systems.
The internal angle fitting helps connect two ogee gutter lengths at a 90° inside corner, creating a neat and continuous gutter run. It is suitable for houses, extensions, garages and general trade roofline work where a decorative high-capacity gutter profile is required.
Kayflow Ogee Angle Features
- Kayflow Anthracite Grey ogee internal angle
- 90° internal corner fitting
- Designed for 120mm ogee guttering
- Creates an inside corner in the gutter run
- Anthracite Grey PVC-U finish
- Suitable for decorative high-capacity rainwater systems
- Compatible with Kayflow ogee gutter lengths and fittings
- Suitable for domestic rainwater installations
- Useful for repairs, replacements and new gutter systems
- Supplied as a single fitting
Common Uses
- Creating internal 90° corners in Anthracite Grey ogee guttering
- Domestic gutter replacement
- Roofline and rainwater repairs
- House, garage and extension guttering
- Replacing damaged internal corner fittings
- High-capacity domestic rainwater systems
- Trade building plastics and roofline jobs
Compatible Products
This 90° internal angle is designed for use with Kayflow 120mm ogee guttering. It should be used with compatible Kayflow ogee gutter lengths, fascia brackets, union brackets, running outlets, stopends and stopend outlets.
For downpipe connections, match the ogee gutter system with suitable Kayflow 65mm square downpipes or Kayflow 68mm round downpipes and fittings.
Installation Notes
Before fitting, check that both gutter ends are clean, square and free from swarf. Make sure the fitting is the correct internal corner for the layout before clipping the gutter lengths into place.
Support the gutter run with fascia brackets at suitable intervals and allow for normal movement in the rainwater system. After installation, test the gutter run and check the internal corner joint for leaks.
Browse more products in our Kayflow Ogee Guttering, Kayflow 65mm Square Downpipes & Fittings, Kayflow 68mm Downpipes & Fittings and Kayflow Guttering & Downpipes categories.
For manufacturer information, see the Kayflow Ogee Gutter information.
