Description
Wirquin Jollyflex 32mm 1¼” Extendable Flexible Waste Pipe
Wirquin Jollyflex is a 32mm / 1¼” extendable flexible waste pipe for basin, cloakroom and small waste pipework. It is designed to help overcome awkward waste pipe runs, misaligned outlets and tight spaces where rigid fittings are difficult to install.
Wirquin Jollyflex Trade Overview
The Wirquin Jollyflex 1¼” flexible waste pipe is a practical connector for plumbers, bathroom fitters and maintenance teams working on basin and small waste pipe installations. It is especially useful where the trap or waste outlet does not line up neatly with the existing pipework.
The extendable corrugated body can be shaped to suit the installation, helping reduce the need for multiple rigid bends or offset fittings. This makes it useful for repair jobs, refurbishment work and awkward pipe routes below basins, vanity units and cloakroom sinks.
The fitting has a 1¼” female nut at one end, which screws onto a compatible waste outlet, and a 32mm outlet connection at the other end. Wirquin supplies the connector with a fixing hook, helping support the pipework once positioned.
Key Features
- Wirquin Jollyflex 32mm / 1¼” extendable flexible waste pipe
- Designed for basin, cloakroom and small waste pipework
- Extendable length from approximately 270mm to 700mm
- 1¼” female nut connection at one end
- 32mm outlet connection
- Flexible corrugated body for awkward angles and offsets
- Can help compensate for misaligned waste pipework
- Supplied with fixing hook clip
- White plastic finish
- Useful for domestic repair, maintenance and refurbishment work
Common Uses
- 32mm basin waste pipework
- Cloakroom basin installations
- Vanity unit waste pipework
- Misaligned waste pipe connections
- Awkward waste pipe offsets
- Bathroom repair and maintenance work
- Replacement waste pipework in tight spaces
- Trade plumbing installations
Why Choose an Extendable Flexible Waste Pipe?
An extendable flexible waste pipe is useful when pipework does not line up neatly enough for a standard rigid waste fitting. It can save time on repair and replacement jobs, especially where the existing waste run is already fixed in place.
The Wirquin Jollyflex 1¼” version is suited to 32mm basin and small waste pipework. For larger sink, bath or utility waste pipework, use a 40mm / 1½” flexible waste connector instead.
Installation Notes
Before fitting, check that the waste outlet and pipework are suitable for a 32mm / 1¼” connection. Dry fit the Jollyflex first to confirm the required angle, offset and length.
Avoid over-stretching or twisting the flexible body. Make sure the pipe run still has a suitable fall for drainage, and use the fixing hook where required to help support the connector.
After installation, run water through the waste pipework and check all joints for leaks.
The Wirquin Jollyflex is a flexible waste connector, not a complete bottle trap. For full basin waste setups, use it with suitable traps, wastes and compatible waste fittings.
Browse more products in our Flexible Waste Connectors, 32mm Waste Traps 1¼” and Waste Traps, Valves & Connectors categories.
For manufacturer information, see the Wirquin 1¼” extendable connector information.
